NDT Supplemental Criteria Updated

The NDT Task Group has revised its User Member Supplemental Criteria (AC7114S, AC7114/1S, AC7114/2S, AC7114/3S and AC7114/4S).

PRI Operating Procedure requires a 90-day notification of checklist revisions prior to their use in Nadcap audits. Thus, all NDT audits initiated on or after June 23, 2008 shall utilize the revised Supplemental Criteria.  Audits initiated between now and June 22^nd are encouraged to follow the new guidelines if possible.

All of the User Member Supplemental Criteria mentioned above can be found on eAuditNet at www.eAuditNet.com by clicking on Checklists then by filtering on NonDestructive Testing under Commodity.  Any changes made to above-mentioned documents are denoted by a vertical line to the left of the change. 

Should you have any questions regarding these revisions, please feel free to contact a member of the Nadcap NDT Department:

Mark Aubele, Senior NDT Staff Engineer, +1 724 772 1616 ext 8654, maubele@sae.org

Mike Gutridge, Senior Staff Engineer (AQS/NDT/Welding), +1 740 587 9841, mikeg@sae.org

Phil Ford, Senior NDT Staff Engineer, +44 (0) 144 322 5545, phil.ford@pri-europe.org.uk

Jim Bennett, Senior Staff Engineer (NDT/Fasteners), +1 724 772 1616 ext 8651, bennet@sae.org